Display; Automatic Key-Lock; Vibration; Service - Tylo h1 Mode D'emploi

Display

Sleep – Enter the length of time (in seconds) the control panel remains inactive before the
display switches off.

Automatic key-lock

– Enter whether or not the automatic key-lock is to be
activated (current status is displayed) and the length of time before the key-lock is
activated.

Vibration

Here you can choose whether or not you wish the panel to vibrate slightly when a button is
pressed.

Service

Under the service menu you can, for example, change the parameters that were set during
the initial installation process. The code 124 must be entered to access the service menu.
The following sub-menus are available:
Max. running time –
Enter desired running time.
Max. temp. –
Enter maximum temperature limit. (Default values are 110°C for sauna
bathing and 55°C for steam baths.)
°C or °F
– Display temperature in Celsius or Fahrenheit.
24h or 12-hour
Display time according to the 24-hour or 12-hour clock.
–
Priority temp/humidity (Combi Compact only)
Select the desired priority for the heater:
Auto – Priority determined according to the temperature set (default setting).
Temperature – Heating up sauna is prioritised.
Humidity – Production of steam is prioritised.

Factory reset

– All previously set parameters are cancelled and an initial start-up is required.
See "Initial set-up process" on page 14. You must enter code 421 to do this.
Test
Used by Tylö engineers for functional testing and trouble-shooting.
–

Cleaning

- Clean the glass with a proprietary window/glass cleaner and a soft cloth.
17