Technical Data; Limited Warranty - Powerworks XB 40V Manuel D'opérateur

PROBLEM POSSIBLE
CAUSE
The power switch
is defective.
The machine The motor is de-
does not start. fective.
The PCB board is
defective.
The air does not
flow through the The air inlet or
tube when you tube outlet has a
start the ma- blockage.
chine.
15

TECHNICAL DATA

Voltage 40 V
Air volume 450 CFM
Air speed 120 MPH (193 Km/h)
Weight (without 4.41 lbs. (2.0 kg)
battery pack)
Battery model BAP series
Charger model CAP series
The recommended ambient temperature range:
Item
Blower storage tempera-
ture range
Blower operation tempera-
ture range
Battery charging tempera-
ture range
Charger operation temper-
ature range
Battery storage tempera-
ture range
Battery discharging tem-
perature range
English
SOLUTION
Replace the de-
fective parts by
an approved
service center.
Remove the
blockage.
Temperature
-4°F (-20°C) - 158°F
(70°C)
-4°F (-20°C) - 104°F
(40°C)
39°F (4°C) - 104°F (40°C)
39°F (4°C) - 113°F (45°C)
1 year: 32°F (0°C) - 73°F
(23°C)
3 months: 32°F (0°C) -
113°F (45°C)
1 months: 32°F (0°C) -
140°F (60°C)
6.8°F (-14°C) - 113°F
(45°C)
16

LIMITED WARRANTY

YEAR/ANS/AÑOS
TOOL WARRANTY
GARANTIE DE
L'OUTIL
GARANTÍA DE LA
HERRAMIENTA
Powerworks hereby warranties this product, to the
original purchaser with proof of purchase, for a period of
two (2) years against defects in materials, parts or
workmanship. Powerworks, at its own discretion will
repair or replace any and all parts found to be defective,
through normal use, free of charge to the customer.
This warranty is valid only for units which have been
used for personal use that have not been hired or
rented for industrial/commercial use, and that have
been maintained in accordance with the instructions in
the owners' manual supplied with the product from new.
ITEMS NOT COVERED BY WARRANTY:
1. Any part that has become inoperative due to
misuse, commercial use, abuse, neglect, accident,
improper maintenance, or alteration; or
2. The unit, if it has not been operated and/or
maintained in accordance with the owner's manual;
or
3. Normal wear, except as noted below;
4. Routine maintenance items such as lubricants,
blade sharpening;
5. Normal deterioration of the exterior finish due to use
or exposure.
HELPLINE:
Warranty service is available by calling our toll-free
helpline, at 1-855-470-2181 .
TRANSPORTATION CHARGES:
Transportation charges for the movement of any power
equipment unit or attachment are the responsibility of
the purchaser. It is the purchaser's responsibility to pay
transportation charges for any part submitted for
replacement under this warranty unless such return is
requested in writing by Powerworks.
9
EN