Memory Functions - smartheart Premium Talking 01-527 Manuel D'instructions

MEMORY FUNCTIONS

Recalling Measurements in Memory
This monitor stores and recalls up to 99 measurements,
plus an average of the last three measurements in each
memory bank / per user.
Select the user to review; see page 10 for instructions
on how to change the User.
All results will be announced aloud in the selected
memory bank if the voice feature is On.
1. Press and release the M button. The unit will first
display the average of the last three measurements,
Fig 1.
2. Press the M button again to begin scrolling through
the saved measurements. Measurements will
appear on the display from most current to oldest;
the memory number will appear on the lower right
corner of the display, Fig 2. Press M again to
proceed to the result, Fig 3.
3. Press the START/STOP button to turn the unit off.
Clearing Measurements from Memory
Memory for a specific bank may be entirely deleted
while in Memory Recall mode.
1. Press and hold the SET button for approximately
3 seconds to delete all memory records from the
selected group with voice broadcast "Memory
Clear" and then transfer into testing mode, Fig. 3.
2. Press the START/STOP button to turn the unit off.
NOTE: Memory can not be recovered once it has been
deleted.
18 • ENGLISH
mmHg
Ave
M D
Fig. 1
N o
M D
Fig. 2
mmHg
M D
Fig. 3