LEGRAND 0 503 96 Mode D'emploi page 11


Configuration of WIFI repeater function
9 - Wait for a few seconds while the reboot takes place (progress bar reaches 100%).
10 - Wait a few seconds for the repeater to take the name of your amplified
network
11 - The configuration process is now completed. Your WIFI repeater is operational.
2
Configuration of WiFi access point function
1 - Connect the multi-outlet to a mains socket and press the main ON/OFF
switch to turn it on.
2 - Press and hold the RESET button (6 to 10 seconds).
3 - Connect an Ethernet cable (from a router) to the IN port.
4 - Open the wireless configuration utility on your terminal (computer, tablet,
phone), select the name of the multi-outlet network Legrand_WIFI_Vx_
xxxxxx and connect to this network.
5 -
(cont)
Network 1
Open your internet browser and enter the address 192.168.16.1
then click Enter.
Enter the default password: admin
Enter the default password: admin
Then click Enter
11
Currently connected to:
Network 1
Internet access
Wireless network connection
Network 1
Network 2
Network 3
Guest
Other network
IN
RESET
Currently connected to:
Internet access
Wireless network connection
Legrand_Wi _V1_A430EC Connected
Network 1
RR04DSI
RR05DSI
Guest
Other network