Velleman CAMSETW4 Mode D'emploi page 2

5. Camera
a. Description
Fig. 1
1. Antenna
2. Low battery indicator
3. Power indicator (camera kit / baby monitor)
4. Eyeball camera lens
5. Power ON/OFF switch
6. Microphone
b. Mounting the camera
• Prior to drilling and inserting the screws, make sure there are no electric cables in the wall.
• Select a suitable installation site. Install the camera in a well-ventilated, dry and dust-free place. Avoid places
with vibrations. Make sure there is a power outlet.
• Select a place that is not screened off by reinforced concrete walls, mirrors, metal shelves, etc.
• There shouldn't be any appliances with strong electric fields, e.g. cell phones, walkie-talkies, etc.
• Fasten the wall bracket:
o Screw the wall bracket with the supplied screws to a suitable wall or platform. Use dowels if relevant.
o Align the camera and fix the corrugated plastic sleeve.
Fig. 2
CAMSETW4
7. IR LED
8. Camera ON/OFF switch
9. Channel switch
10. DC power
11. Power adapter plug with low-voltage switch
- 2 -
1. Slot
2. Support
3. Battery compartment
VELLEMAN