Midea MDT24H3ASTC Guide De L'utilisateur page 14

NOTE: To cancel the Delay feature, press and hold the START control
for 3 seconds to Cancel. To begin the wash cycle immediately, press
START again.
CTL LOCK (Control Lock)
The Control Lock feature locks all controls to avoid unintentionally
changing the dishwasher cycle or starting the dishwasher. The LED
next to Control Lock will illuminate to indicate the Control panel is
locked.
•
Press and hold for 3 seconds DELICATE and QUICK at the same
time to either activate or cancel the Control Lock option.
Turning off Sound
•
Press and hold for 3 seconds AUTO and NORMAL at the same time
to deactivate or activate the control tones and the end of cycle
tone.
e
START
START - Press START once and close the door. The cycle will begin.
NOTE: You must close the door within 4 seconds of pressing START.
PAUSE - If you need to pause or cancel a dishwasher cycle in process:
IMPORTANT: Open the door slightly, and then wait for the spray arms
and wash action to stop before opening the door completely. Doing
this will help keep you from being splashed with hot water.
1.
Open the door slightly and wait a few seconds until the wash
action stops.
2.
Open the door to add or remove items.
3. Press START, and then close the door within 4 seconds.
4. The wash cycle will automatically resume.
CANCEL - To cancel a cycle when the dishwasher is running, open the
door slowly. Press and hold START for 3 seconds and close the door.
f
INDICATOR LIGHTS
Rinse Aid
The Rinse Aid indicator light illuminates when the rinse aid level is low.
Rinse Aid should be added to the Rinse Aid dispenser.
Control Lock
The Control Lock indicator light illuminates to indicate the Control
Panel is locked. Press and hold DELICATE and QUICK at the same time
for 3 seconds to unlock the control panel.
Sanitized
The Sanitized indicator light illuminates when the cycle using the
Sanitize option is finished.
The light turns off 30 seconds after the door is opened.
14