Giropes Baxtran BR20 Manuel D'utilisation page 27

PROGRAM SUBFUNCTION
MAXIM SUPERIOR LIMIT
PO CHk
LIMIT + ALARM
MAXIM INFERIOR LIMIT
P1 ref
AUTOZERO TURN ON
Only accessible by
placing internal jumper
0 Range
K2
ZERO
CERO MODO NETO
!
P2 Con
RS232
+
PRINTER
P3 CAL
CALIBRATE
!
P4 otH
LOCK
KEYBOARD/ANIMAL
DESCRIPTION
Press
SEt H
Press
Press
SEt lo
Press
no: without alarm.
beeP
ok: alarm when the weight is between the maxim and the minimum limit. (OK)
ALARM MODE
nG: alarm when the weight is out of the minimum-superior rang. (NG)
AZn 0
Automatic zero tracking selection
AUTO ZERO
0 Auto
Autozero selection when turn on
Manual autozero selection
CERO MANUAL
0 Tare
Automatic tracking in net mode
Speed
Converter speed
SPEED AD
This option is used to program de RS-232 mode.
Options:
Cont: sent continuous.
St1: send an information after to estabilize the scale.
StC: Send information continuously when stabilized.
Pr1: When you press the print key, send a data frame (in print mode).
Pr2: cuando presione la tecla
ñode
Auto: Auto accumulation (auto print), when the weight is stable and then returns
MODE RS232
to zero, the indicator will perform the automatic accumulation and printing ope-
ration.
ASk: Ask mode, bi-direction.
Command R; read information.
Command T; tare.
Command Z; zero.
bAUd
This option is used to program the data frame speed.
Options: 600|1200|2400|4800|9600
SPEED
TRANSMISION
Pr This option is used to programa the parity verification.
Options: 7E1 | 701 | 8N1
PARITY
tPVP : For mini printers.
PtYPE
LP50 : For labeling
PRINTER TYPE
CoUnt
The screen shows xxxxx to indicate the internal accounts.
This option is used to select the decimal.
dEC
Options: 0 - 0.0 - 0.00 - 0.000
This option is used to select the dual division. So you can program the division
dDUAL
and the capacity of the Rang 1 and the Rang 2.
CAL
Calibrate.
loCK
Allow / Do not allow the keyboard closure.
ON; animal mode
ANÑ
OFF; normal mode
ON/OFF
USER'S MANUAL
and to move the active digit. Press
to delete information. Press
and to move the active digit. Press
to delete information. Press
, imprime datos y M+ al mismo tiempo.
BR20 | BR30
to change the value.
to confirm.
to change the value.
to confirm.
EN
27