User Manual
4.6 Internal lighting
In models DR49, DR55F, DR65, DR85, DR130 internal lighting (12-24V LED) is located
at the top.
Warnings! The refrigerator is equipped with high luminous intensity LED lighting.
Avoid direct exposure to the light beam with eyes.
Replacement of the LED lighting unit must only be carried out by qualified personnel
or by Service Centres.
DR160 & DR190 are equipped with internal illumination which is incandescent. Check
to make sure that a proper 12 V/24V light bulb has been installed, based on the
voltage of the electrical system to which the refrigerator has been connected. The
consignment includes a 12V and 24V light bulb, with a maximum power of 3 watts.
Always use the 12V light bulb with models equipped with an optional AC/DC control
unit, regardless of the power supply.
For all models equipped with optional Power Pack power supplies, always use the
24V light bulb (max. 3 watts). A high-brightness LED 12/24V (max. 3 Watts) light bulb
can be used as an alternative (not included).
In order to replace the light bulb, slide the lighting unit's glass down using the
appropriate lever. Replace the light bulb and to return the lighting unit to its original
state. See the diagram.
48