Ice Maker (Dr160 Combo Model Only); Maintenance - Indel Webasto Marine DR49 Instructions Pour L'installation Et L'utilisation

User Manual

2.5 Ice Maker (DR160 COMBO model only)

The ice production kit, present on the DR160 COMBO
model only, has a production capacity of about 8kg of
ice per day. The technology used is called "pushed."
Water is frozen into cubes in a special tray and then
is "pushed" out of the tray. The ice cubes then drop
into the collection container.
The cube produced is white with a special half-moon
shape. See photo.
To activate the ice maker, move the stop lever to the ON position. (see figure).
The ice maker will begin its production cycle and, once the ice collection tray
is full, the stop lever will raise slightly from the
accumulation of ice, stopping the production cycle.
Once the ice is removed, the lever will return to the
ON position and the production cycle will restart.
To stop ice production, bring the stop lever to the
OFF position as shown in the figure.

3. Maintenance

Isotherm Drawer refrigerators are equipped with closed cooling systems, which do
not require maintenance or refrigerant refills.
The compressor is specifically designed for mobile applications and guarantees
maximum performance and durability. In the winter, the refrigerator must be stored
inside the boat, but the compressor will not work at temperatures near or below
0°C. Seasonal maintenance is limited to the cleaning of the condensing unit behind
the refrigerator. In particular, it is necessary to brush/vacuum out all the dust that
has accumulated due to the fan. This can be done using a soft brush and a vacuum
cleaner. It is important to keep the inside of the refrigerator clean by washing it
with warm water and mild soap and by drying any water/condensation that may be
encountered.
In order to prevent damage to the electrical/mechanical components and/or the
formation of mould, when shutting off the refrigerator for extended periods of
time it is necessary to wait for the unit to defrost completely and to eliminate any
condensation that may have formed, both inside the appliance and in the external
41