Changing Settings - CALEFFI 618 Mode D'emploi

Copying the program to other days
“
After programming the day you can copy it
day by pressing simultaneously buttons
“If you want to set other programs, choose the day with the
button then do the programming by pressing the key (tappet)
as described above.
G
F
Displaying programs entered relating to the days of the
week (weekly model only)
B
Press and release the Day key repeatedly.
Note: When you finish programming or viewing, 5 seconds after last
pressing the button, the chronothermostat will automatically go into
the operating state (index of the current
It is possible at any time to pass from viewing the display of the
current time to the ambient temperature (degrees centigrade) and
vice versa, by briefly pressing the
2 4
21 1 3
18 6
3
15 9
1 1 2
Display Set temperature t
refer to paragraph 11
20
(weekly model only)
(copy) onto the next
and Day .
/
Day
½ h blinking).
/
button.
2 4
21 3
/
18 6
3
15 9
2 1 1 2
and/or t set

CHANGING SETTINGS

Changing the current time
“
/
Keep button pressed until the current time blinks
“
Change the hour and/or minutes with the
described above.
Changing the current day (weekly model only)
“
Keep the Day button pressed until the number corresponding
to the current day blinks.
“
Set the new current day by pressing the
Changing the entered programs
Daily model
“
Change the program by using the key (tappet) as described
above
Weekly model
“
Change the program for the current day by using the key
(tappet) as described above
“
To change the program for the others day of the week select the
desired day with the Day button and use the
described above
Note: when you finish making your changes, 5 seconds after last
pressing the buttons, the chronothermostat will automatically go
into the operating state (index of the current
Modify T Set temperature t
refer to paragraph 11
/
button as
Day button
key (tappet) as
½ h blinking).
and/or t set