Assembly; Assembling The Blower Pipe - Zenoah EBZ8500 Manuel D'utilisation

Assembling the blower pipe

• Connect the blower and control pipe with the flexible
hose. Clamp both ends of the flexible hose securely
with the hardware supplied with the unit.
1 Flexible hose
2 Control pipe
3 Clamp
4 Intermediate pipe
5 Blower nozzle
• When connecting the control pipe (2) with flexible
hose, set "UP" mark on the pipe facing upward.
• Align the protrusion- and the groove provided on the
blower nozzle and twist the blower nozzle until
connection is locked.
• Apply grease to the pipes if necessary.
Note: Lubricate the pipes a little to facilitate assembly.

ASSEMBLY

• Insert the control handle in the control pipe and fix by
the bolt.
1 Control handle
2 Bolt
• The position of the control handle can be adjustable
back and forth by loosening "knob bolt" on the handle
by hand.
3
1 Control handle
2 Control pipe
3 Knob bolt
Use the clamp to fasten the cabling to the flexible hose.
1 Clamp
2 Cabling
3 Flexible hose
1
2
2
1
3
–
English 107