Sensica Sensilift Mode D'emploi page 14

Select different levels based
on the preliminary test.
5. Sensilift is equipped with
2 safety sensors which
will keep the temperature
in the effective and safe
range during the entire
treatment.
Note: The device stops
the heating when desired
temperature is achieved;
heating is then re-activated
when the temperature beings
to drop.
6. Place the treatment
fingers on the intended
area, ensuring full contact
with your skin during the
entire treatment. Sensilift
will indicate the proper
skin contact by the green
status light. If Sensilift is
not properly placed, the RF
energy will not be delivered.
Note: The device will
automatically turn-off after 45
seconds of no skin contact.
14
7. If you do not feel
sensations of warmth after
approximately 10 seconds,
try moving Sensilift on a
smaller treatment area,
and/or increasing the RF
energy.
8. Move the device on the
treated area in slow circular
or back and forth motion
while constantly and firmly
contacting the skin.
9. See treatment areas,
treatment time and
treatment schedule in the
Recommended Treatment
section.
10. After completing the
treatment, wipe off the
remaining Base Gel from
the treated area.
11. Cleaning instructions for
before and after treatment
are depicted in the
Cleaning & Storage section.