Drive Medical RTL11148KDR Mode D'emploi page 2

Pail Support Frame
Side Frame
Locking
Collar
Bucket
Weight Capacity: 350 lbs (158 Kg)
assembly instructions
1. Remove contents from carton.
2. The legs will automatically slide into the side frame
by use of the elastic cords.
Important Note:
The bottom of the side frame (figure 1) and the top of
the commode leg feature a mating flange. Match up the
flange on the side frame with the flange on the commode
leg. Slide the leg up and into the side frame (figure 1).
Once the leg is properly fit, slide gray locking collar into
the fitting on the side frame and turn clockwise until tight
(figure 2). Repeat the process on all legs.
Rev.4.04.28.14
Lid
Backrest
Lock
Knob
Seat
Side
Frame
Flange
Commode
Leg
figure 1
3. Line up the side frame with the pail support frame
(figure 3). Slide the pail support frame into the side
frame while depressing the push pins until the push
pin "pops" into the hole on the side frame. Once
the one side of the pail support frame is secure
in the side frame, turn the lock knob on the back of
the side frame until hand tight (figure 4). Repeat on
the other side.
Side
Frame
figure 2
Pail Support
Frame
figure 3
Lock Knob
figure 4