Before Use - Tascam TU-690 Manuel Du Propriétaire

6

Before Use

Read this before operation
< Choose the installation location of your unit carefully. Avoid
placing it in direct sunlight or close to a source of heat. Also
avoid locations subject to vibrations and excessive dust, heat,
cold or moisture.
< Do not open the cabinet as this might result in damage to the
circuitry or electrical shock. If a foreign object should get into
the set, contact your dealer.
< When removing the power plug from the wall outlet, always
pull directly on the plug, never yank the cord.
< Do not attempt to clean the unit with chemical solvents as this
might damage the finish. Use a clean, dry cloth.
< Keep this manual in a safe place for future reference.
Resetting the Unit to Normal
In the following cases, function buttons may not work properly.
1) When the system is damaged by some electrical shock.
2) When the power is irregular or has electrical noises.
In these cases, unplug the AC power cord and plug it again.
ENGLISH