Name Of Each Control - Tascam TU-690 Manuel Du Propriétaire

aPOWER switch
Press this switch to turn the unit on and off.
This unit does not turn all the way off. When you press the
POWER switch (or the remote STANDBY button) to turn the
unit off, the center display is switched to show the current
time.
bNumeric buttons
These are used either to directly input frequency numbers or
to select preset stations.
14

Name of Each Control

cDIRECT TUNING button
Press this button and you can use the numeric buttons to
directly input frequency numbers.
dDisplay
eTIMER button
Press this button to put the tuner under the control of a built-in
timer in terms of automatically switching on power to the unit
at a predetermined time and turning it off after a
predetermined time period.
fFM MODE button
This button toggles Stereo and Mono modes.
gTUNING MODE button
Press this button to toggle Preset and Tuning modes.
hTUNING/PRESET/TIME buttons
These buttons are used to: 1) search out stations; 2) let the
unit tune in to a preset station; and 3) set a built-in clock and
timer.
iTIME SET button
Press this button and the MEMORY/SET button is available to
set a built-in clock and timer.
jSLEEP button
This button lets you set a time at the end of which this unit
automatically switches itself off.
kMEMORY/SET button
This button is used either to store stations in presets or to set
a built-in clock and timer.
lAM/FM select button
Use this button to select either of the frequency bands.
ENGLISH