Verifying The Gv Convergent Kit; Installing The Gv Convergent Controller - Belden grass valley GV CONVERGENT Mode D'emploi

GV Convergent Quick Start
Requirements
Step 1: Verifying the GV Convergent Kit
GV Convergent Kit Contents
• 1-RU SuperMicro© SYS-6018R-MTR server (1)
• Power cords (2)
• Rack mounting kit (1)
Step 2: Installing the GV Convergent Controller
To install the GV Convergent Controller hardware
1 Install your GV Convergent hardware in a rack following the directions in the
SuperServer Installation Manual.
2 Connect your management Ethernet cable to the management Ethernet port.
By default, this is the Ethernet port on the left (em1).
2
IMPORTANT: Please verify the completeness and condition of all parts
before performing the procedures in this guide. If any items are missing
or damaged, contact Grass Valley Customer Support immediately.
.
Before attempting to install the chassis into a server rack, we
Note:
recommend that you read the Warnings and Precautions section in the
Server Installation chapter of the SuperServer 6018R-MTR Series User's
Manual.
Management Ethernet Port
Ethernet Ports NIC Ports