Troubleshooting; Troubleshootig - Klarstein DRYFY PRO Instructions

EN
24

TROUBLESHOOTING

Errot codes
Code Description
E1 Room temperature (ambient temperature) sensor for short circuit
E2 Room temperature sensor open circuit
E3 Humidity sensor short circuit
E4 Humidity sensor open circuit
E5 Coil sensor short circuit
E6 Coil sensor open circuit

Troubleshootig

Problem
The operation switch is
"ON",but the machine
is not operation.
The dehumidification
amount is too low.
Long time operation
can not reach the
suitable humidity
condition.
When the machine is
making huge noise.
The lamp is
continuously on.
Possible Cause and Suggested Solution
Is the water tank placed in the right position?
Is the power plug inserted right position?
Is the fuse broken?
Is the power off?
Is the front filter net dirty?
Is the interior temperature and the humidity too low?
Is the air outlet and air inlet jammed?
Does the door or window too widely open?
Is there any generated water evaporator?
Is the interior space too big?
Is the floor flat and hard?
Is the dehumidifier in the right position?
Is the temperature or humidify sensor is damaged or
loosen?