Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
switching top and rear venting
VENTED
MODE
TO CONVERT THE UNIT FROM TOP EXHAUST TO REAR EXHAUST
FOLLOW THESE SIMPLE STEPS:
1. Unplug the quick disconnect coupling that supplies power to the motor.
2. Remove the twelve (12) screws that fasten the blower assembly and filler
plate to the hood.
180°
Y
3. Remove the blower assembly and filler plate, invert 180° as shown and
fasten in place using the twelve (12) screws previously removed.
4. Reconnect the quick disconnect plug.
- 15 -
Publicité
Table des Matières
