Specific Safety Instructions - Perel Tools PRD18V2 Notice D'emploi

• Familiarise yourself with the functions of the device before actually using it. Do not allow operation by unqualified
people. Any damage that may occur will most probably be due to unprofessional use of the device.
• When using an extension cord, make sure the wires are at least 1mm². Do not use extension cords on a reel.
• Only use the device for its intended purpose. Using the device in an unauthorised way will void the warranty.
• Always make sure you are in a stable position while using the PRD18V2.
• Make sure you can never touch water, electricity or gas lines while working.
• Do not use the PRD18V2 in the vicinity of flammable vapours and substances.
• Vibrations can damage the arm-hand system. Keep exposure to vibrations as short as possible.
• Check the voltages marked on the rating plate and verify it matches your mains voltage.

3. Specific Safety Instructions

• Remove the battery from the machine during maintenance and when it is not used for a longer period of time.
• Only use the prescribed charger to load the battery. Do not charge other batteries than the prescribed type (18V
DC).
• Only use the charger in a dry environment and a temperature between 10°C and 40°C.
• Only use the charger and battery when both are not damaged.
• Prevent the battery from shortcutting.
• Never attempt to open the battery.
• In case of skin contact with the battery liquid (a solution of 20-30% potassium hydroxide), flush immediately and
abundantly with water. Neutralize with a mild acid like lemon juice or vinegar. In case of eye contact, rinse
abundantly for at least 10 minutes with clean water and consult a physician.
4. Description
1. Chuck sleeve
2. Torque adjustment collar
3. Keyless chuck
4. Forward/reverse switch
5. ON/OFF switch
6. Battery
7. Battery release button
PRD18V2 4 PEREL