Power On / Power Off - BeeWi BBS200 Instructions

4 4
Charging
Charging Completed
2. Using the product
2.1 Power Supply and Charging
a. The battery must be charged with the enclosed USB cable charger.
b. The red LED indicator will stay on while charging and will be off as
soon as it is completed. It takes approximately 2.5 hours to re-charge
every time.

2.2 Power On / Power Off

a. Power On: long press the
until the red and blue LED indicators blink 3 times simultaneously.
b. Power Off: long press the
until the red and blue LED indicators light on and light off simultaneously.
2.3 Pair and connect
a. Refer to the Bluetooth pairing procedures in the mobile phone or music
player user manual.
b. When the device is off, long press the
until the blue indicator blinks rapidly, then release the button. At this mo-
ment, the product is in the pairing mode.
c. Select the device name "BBS200" displayed on the phone and enter
the pass key "0000" to add the device to the pair list and establish the
connection.
d. Check the connection by placing a call or playing the music from your phone.
Note: when using both Hands-Free and Music profiles, hands-free will
always have the priority, the music being muted in case of incoming or
outgoing calls. As soon as the call has been hung up, the music rebound
afterwards.
Note: the last connected device will always reconnect automatically. Sim-
ply turn it on and the connection will be established automatically.
Note: If the mobile phone supports only Headset profile, Bluetooth recon-
nection will take place automatically when call is established (refer to the
mobile phone user manual).
Red
Red
button for 2 seconds under power off status
✆
button for 2 seconds under standby status
✆
✆
Light on
Light off
button for about 10 seconds