Greenlee BLL-200 Manuel D'instructions page 5

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Important Safety Information
Electric shock hazard:
• Do not use the unit if it is wet or damaged.
• Use test leads or accessories that are appropriate for the application. See the
category and voltage rating of the test lead or accessory.
• Inspect the test leads or accessory before use. They must be clean and dry, and the
insulation must be in good condition.
Failure to observe these warnings can result in severe injury or death.
Electric shock hazard:
• Do not connect the transmitter to a circuit carrying more than the rated voltage.
• Do not contact the lead clips or any uninsulated portion of the accessory.
Failure to observe these warnings can result in severe injury or death.
• Do not operate with the case open.
• Before opening the case, remove the leads from the circuit and shut off the unit.
Failure to observe these warnings can result in severe injury or death.
Beware of any vehicles or machines in motion at the work area. Be especially observant
when tracing a buried line that runs along or under a roadway, railroad tracks, or
through a construction site.
Failure to observe this warning can result in severe injury or death.
BLL-200
5

Publicité

Table des Matières
loading

Table des Matières