Replacement Parts - Greenlee BLL-200 Manuel D'instructions

Maintenance
Battery Replacement for Transmitter and Receiver
Before opening the case, remove the test leads from the circuit and shut off the unit.
Failure to observe this warning can result in severe injury or death.
1. Disconnect the unit from the circuit. Turn the unit OFF.
2. Remove the screw from the battery cover.
3. Remove the battery cover.
4. Replace the batteries (observe polarity).
5. Replace the cover and the screw.
Cleaning
Periodically wipe the case with a damp cloth and mild detergent; do not use abrasives or
solvents.

Replacement Parts

501 0330.0 Inductive Clamp
501 0331.8 Transmitter
501 0342.3 Receiver
500 8372.4 Ground Rod
500 8373.2 Test Lead Set
500 8374.0 Carrying Case
BLL-200
19