Net Toner (16); Voltage Source For Voice Connection - VOLTCRAFT LSG-3 Mode D'emploi

Net toner (16)

Voltage source for voice connection

The net toner can be used as the source of voltage for voice con-
nections for test purposes.
Make sure before connection that the cables are not
alive (danger to life).
• Turn the switch-over for test mode (22) to the central position
"OFF".
• Make the connection as depicted using the two crocodile termi-
nals (24) and the test telephone.
• Operate the pushbutton (20) until it snaps in.
• Turn the switch (22) to the left to the position "CONT/Talk".
• The two test telephones are now supplied with voltage.
• Turn the switch-over (22) after the end of the test to the central
position "OFF".
29