Human Touch Gravis ZG Mode D'emploi Et D'entretien page 7

take a seat
ADJUST THE RECLINE ANGLE
Use the remote control Back buttons to recline to the desired position, then use the Foot buttons to adjust
the footrest angle. Or, simply press the ZG button on the remote control or the front right-hand arm sensor to
to automatically recline to a neutral-posture position, for maximum spinal relief.
Front right-hand arm
ZG – Reclines the chair into Restore – Restores the chair
the zero-gravity position to the upright position with
footrest lowered
ADJUST THE HEADREST
Use the Head buttons to adjust the headrest as desired.
GETTING OUT OF THE CHAIR
To easily exit the chair, press the Power button on the remote control or the rear right-hand arm sensor
to restore the chair to the upright position with the footrest partially lowered. After ensuring there are
no obstacles underneath the footrest, use the Foot buttons to fully retract the footrest for easier exit.
humantouch.com
Chair in ZG position
10
Using your Human Touch Gravis Zero-Gravity
take a seat and use the Precision Power Recline System to
adjust the chair to the desired position. The Gravis cradles you
in zero-gravity comfort, with your feet above your heart—the
ultimate neutral-posture position for stress relief.
ZG — Press and release to recline
to zero-gravity position.
Head — Adjust headrest position
is easy. Just
Power — Powers the remote on and
off; when the remote is powered off
the chair automatically restores to
the upright position with the footrest
partially lowered. After ensuring there
are no obstacles underneath the
footrest, use the Back buttons to fully
retract the footrest for easier exit.
Foot — Adjust footrest position.
Back — Adjust recline angle.
11