Publicité
Les langues disponibles
Les langues disponibles
TX104/TX107/TX110
EN
Quick Start Guide
HMI – TX104/TX107/TX110
For Your Safety
Intended Use
The HMIs (Human Machine Interfaces) of the TX100 series are used to control,
operate and monitor machine processes.
The devices may only be used as described in these instructions.
Any other use is not in accordance with the intended use; Turck accepts no li-
ability for any resulting damage.
General Safety Instructions
■
The device may only be assembled, installed, operated, parameterized and
maintained by professionally-trained personnel.
■
The device only meets the EMC requirements for industrial areas and is not
suitable for use in residential areas.
■
The device may only be used in accordance with applicable national and
international regulations, standards and laws.
Product Description
Device Overview
See fig. 1
A
B
TX104
136 mm/
96 mm/
5.35"
3.78"
TX107
176 mm/
136 mm/
6.90"
05.35"
TX110
271 mm/
186 mm/
10.66"
7.32"
Functions and Operating Modes
The devices of the TX100 series are HMIs with a resistive 4", 7" or 10" touch dis-
play. They are used to monitor and operate machine processes and are directly
mounted to the machine.
Mounting
See fig. 2 and 3
A = TX1...
B = cut-out
Screw each fixing screw until the bezel corner gets in contact with the panel.
➤
➤
The maximum tightening torque is 0.75 Nm.
TX...
Number of fixing brackets supplied
TX104
4
TX107
4
TX110
11
Connecting
Connectors and slots
See fig. 4
Connector/Slot
Function
1
Serial port (5 V, max. 100 mA)
2
Ethernet port
3
USB port (V 2.0, 5 V, max. 500 mA)
4
Power supply
NOTE
Devices of protection class III according to EN 61140 or Class 2 according to UL
standards:
All connections are SELV connections.
Power supply
Connect the device to the voltage supply according to fig. 5 and 6.
➤
➤
DANGER
Wrong choice of voltage supply
Danger to life due to overvoltage ans electric shock!
Only operate devices at SELV power supplies.
➤
Grounding the device
The minimum conductor cross-section for the ground connection is 1.5 mm².
Connect terminal 3 on the power supply terminal block to ground.
➤
➤
ATTENTION
Unprotected electronic circuits
Destruction of electronics!
Do not open the device under voltage.
➤
C
H
L
29 mm/
107 mm/
147 mm/
1.14"
4.21"
5.78"
29 mm/
147 mm/
187 mm/
1.14"
5.79"
7.36"
29 mm/
197 mm/
282 mm/
1.14"
7.75"
11.10"
Serial port
See fig. 7
Pin
Description
1
GND
2
n.c.
3
TxD/A-
4
RxD/B-
5
n.c.
6
+5 V DC output
7
CTS/B+
8
RTS/A+
Maintenance
The devices must be cleaned at regular intervals with a damp cloth.
Repair
The device must not be repaired by the user. The device must be decommis-
sioned if it is faulty. Refer to our return acceptance conditions when returning
T
the device to Turck.
5 mm/
0.19"
Disposal
5 mm/
The devices must be disposed of correctly and must not be included in
0.19"
normal household garbage.
6 mm/
0.23"
Approvals and standards
Compliance
The products have been designed in compliance with:
■
EN 61000-6-2, EN 61000-6-4
■
EN 61000-4-2 to 4-6, EN 61000-4-8, EN 61000-4-11, EN 61000-4-29
© Hans Turck GmbH & Co. KG | 100002508 2018-05 DE EN FR
Publicité
