Victoria Arduino VENUS FAMILY Mode D'emploi Technique page 18

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

The manufacturer can't be considered responsible
for possible damage caused by improper, wrong,
or unreasonable uses.
WARNING
Before using the machine read carefully and
completely the instruction manual, safety
regulations and the machine tuning/ directions.
The use of any electrical device must comply
with fundamental regulations. In particular:
• do not touch the machine with wet hands or
feet;
WARNING DANGER OF ELECTRICAL SHOCK
Any cleaning operation, the washing or other
interventions inside the machine must be carried
out when the "energetic state is zero",
connecting plug to the net (3) disconnected from
the net itself.
• do not use the machine barefoot;
• do not use extensions in places used as a bath or
shower;
• do not pull the supply cable, to disconnect the
machine from the supplying net;
• do not leave the machine exposed to
atmospheric agents (rain, sun, etc);
• do not allow the machine to be used by children
or by non-authorised personnel that haven't read
and understood this manual.
The authorised technician has to, before
carrying out any maintenance operation, unplug
the socket after having switched off the
machine switch.
bis For the cleaning operations bring the
machine to energetic state "O", that is to say
"machine is switched off and socket
unplugged" and keep exclusively to what is
stated in the present manual.
In case of breakdown or wrong functioning of
the
machine,
switch
Any
intervention
is
strictly
Contact exclusively professionally authorised
personnel. The possible repair of the products will
have to be made by the manufacturer only or by
an authorised service using exclusively original
spare parts.
Non-compliance with the above stated can
compromise the safety of the machine.
When setting it up, the licensed electrician will
have to check an omni-polar switch is provided by
the actual safety regulations with opening
distance from the contacts the same or bigger
than 3 mm.
µ
To avoid dangerous overheating, we do
recommend you uncoil the supply cable to its full
length.
¸
The user mustn't replace the supply cable of
this machine. In case of damage, switch the
it
off.
forbidden.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Venus serie

Table des Matières