Philips Mistral GC2032 Mode D'emploi page 7

Shot of Steam (types GC2032, 2030, 2025, 2016, 2015, 2012,
2011, 2010 only)
A powerful shot of steam helps to remove stubborn creases.
The Shot-of-Steam function only works at temperature settings
between 2 and MAX.
C
1 Press and release the Shot-of-Steam button.
Vertical Shot of Steam (types GC2032, 2030, 2025, 2016, 2015
only)
C
1 The Shot of Steam function can also be used when you hold
the iron in vertical position.
Never direct the steam towards people.
Drip Stop (types GC2032, 2030, 2025, 2020 only)
This iron is equipped with a drip stop function: the iron automatically
stops steaming when the temperature is too low to prevent water
from dripping out of the soleplate.When this happens you will hear a
click.
Automatic shut-off (types GC2032, 2030, 2012 only)
C
An electronic safety device will automatically switch the heating
element off if the iron has not been moved for a while.
To indicate that the heating element has been switched off, the red
auto-off pilot light will start blinking.
To heat up the iron again:
1 Pick up the iron or move it slightly.
2 The red auto-off pilot light will go out.The amber temperature
pilot light will come on, depending on the soleplate
temperature.
ENGLISH
7