MSI 870-G45 Serie Mode D'emploi page 41

▶ CPU Specifications
Press <Enter> to enter the sub-menu. This submenu shows the information of installed
CPU.
▶ CPU Technology Support
Press <Enter> to enter the sub-menu. This sub-menu shows the technologies that
the installed CPU supported.
▶ CPU Feature
Press <Enter> to enter the sub-menu.
▶ AMD Cool'n'Quiet
The Cool'n'Quiet technology can effectively and dynamically lower CPU speed and
power consumption.
Important
To ensure that Cool'n'Quiet function is activated and will be working properly, it is re-
quired to double confirm that:
Run BIOS Setup, and select Cell Menu. Under Cell Menu, find AMD Cool'n'Quiet,
•
and set this item to "Enabled".
• Enter Windows, and select [Start]->[Settings]->[Control Panel]->[Power Options].
Enter Power Options Properties tag, and select Minimal Power Management under
Power schemes.
▶ C1E Support
To enable this item to read the CPU power consumption while idle. Not all proces-
sors support Enhanced Halt state (C1E).
▶ SVM Support
This item is used to enable/ disable SVM.
▶ AMD Cool'n'Quiet
The Cool'n'Quiet technology can effectively and dynamically lower CPU speed and
power consumption.
▶ C1E Support
To enable this item to read the CPU power consumption while idle. Not all processors
support Enhanced Halt state (C1E).
▶ Adjust CPU FSB Frequency (MHz)
This item allows you to select the CPU Front Side Bus clock frequency (in MHz).
▶ OC Stepping
This item will be enabled after you set the overclocking frequency in the "Adjust CPU
FSB Frequency (MHz)". And the following items will appear. This items will help the
system to overclock step by step after system booting up.
▶ Start OC Stepping From (MHz)
This item is used to set the initial FSB clock. The system will boot with the initial FSB
clock, and start to overclock from initial FSB clock to set FSB clock that you set in
"Adjust CPU Base Frequency (MHz)" step by step.
En-31