Set Up; How To Charge Multiple Devices; How To Synchronize Multiple Devices - Lockncharge pclock iQ 16 Sync Charge Box Instructions D'utilisation

Set up

1. If the iQ 16 Sync Charge Box is in any packaging, remove this to ensure good ventilation and dispose of responsibly.
2. If the iQ 16 Sync Charge Box is fitted in the trolley/cart drawer, no relocation is necessary.
3. Ensure the iQ 16 Sync Charge Box power-switch is OFF and the mains power outlet is switched OFF.
4. Insert the power cord into the iQ 16 Sync Charge Box, and plug the other end into the mains power outlet. Switch the mains
power outlet ON.

How to charge multiple devices

1. Connect all the devices required to be charged to the iQ 16 Sync Charge Box USB sockets using only approved USB cables.
The devices may be connected to any of the USB sockets, in any order and any sequence.
2. Switch the iQ 16 Sync Charge Box power-switch ON. The Charge light and Sync light will illuminate momentarily, and then the
Charge light will remain ON. All the devices are now charging.
3. To check the charge status of any device, momentarily switch the selected device ON and check it's on-screen charge
indication.
4. When all the devices are fully charged, switch the iQ 16 Sync Charge Box OFF.

How to synchronize multiple devices

1. Connect all the devices required to be synchronised to the iQ 16 Sync Charge Box USB sockets using only approved USB
cables. The devices may be connected to any of the USB sockets, in any order and any sequence.
2. Switch the iQ 16 Sync Charge Box power-switch ON. The Charge light and Sync light will illuminate momentarily, and then the
Charge light will remain ON. All the devices are now charging.
3. Connect the iQ 16 Sync Charge Box to the host computer which contains the synchronizing software using an approved Type
A to Type B USB cable.
4. Upon connecting the iQ 16 Sync Charge Box to the host computer, the unit will automatically switch from Charge Mode to
Sync Mode and this will be signified by the illumination of the Sync light. PLEASE NOTE: The devices will continue to charge
at a reduced rate.
5. Removing the USB cable from the host computer will return the iQ 16 Sync Charge Box into Charge Mode and the devices will
automatically resume charging if needed.
4
User Instructions