Amprobe AT-6000 Manuel De L'utilisateur page 31

5. MAINTENANCE
Changing the Receiver Batteries
The battery compartment on the back of the Receiver is designed to make it easy for the user to
change the batteries. Four (4) AA 1.5 V alkaline or 1.2 V rechargeable batteries may be used.
Note: Batteries do not come pre-installed in the Receiver.
1. Make sure that the Receiver is turned off.
2. Use a screw driver to unscrew the captive screw.
3. Remove the battery cover.
4. Install batteries.
5. Replace the battery cover and secure it with the provided screw.
4 x AA batteries
Note: The Receiver automatically recognizes if batteries are alkaline or rechargeable and
adapts the battery indication to provide the right information.
Old rechargeable batteries and certain alkaline batteries may not provide accurate battery
level indication. Turn on the device while holding the volume + button to automatically
adjust battery indication for rechargeable or alkaline batteries.
Figure 5.2: Changing the Receiver batteries
27