Sunforce Wind Power Notice D'utilisation page 4

Fig 2: Switches can set to enable maximum current and battery type.
Wiring:
Caution: for safety reasons before wiring, please ensure that the manual brake is set to
the "ON" position. (#2 in figure 1)
The three output wires from wind turbine are Blue / Red / Black and transform three phase AC
current. The three wires need to be connected to the "RST" terminal located on the back of the
Multiple function MPPT charger. (Three phase electric power systems have at least three
conductors carrying voltage. Three phase power is a method of electric power transmission using
three wires)
ON
30A
15A
1 A
Chargeable Deep Cycle
Battery
Chargeable Lead Battery
2 Battery Type
4