Olsson and Brothers STROOT FLIP Guide De L'utilisateur page 17

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

USE GUIDE
• The E-scooter has 3 speed levels.
∙ Low level up to 3km / h, is activated by kicking the e-scooter and accelerating
on the handlebar pushbutton.
∙ Intermediate level up to 8 km/h.
∙ high level up to 14km/h.
• Press the ignition switch located under the scooter's platform and turn it on.
• Hold the handlebar with both hands, place one foot on the pedal and push the
other foot back to achieve acceleration. It will go to a low level (up to 9km / h,
depending on the weight and condition of the soil).
• To decrease the speed, press the brake plate of the rear wheel with one foot and
with the pushbutton on the electric brake handlebar.
• The electric scooter has 2 types of brake.
∙ Electric: through a pushbutton located on the handlebars. Pressing it will disable
the engine and slow down.
∙ Manual: the rear wheel incorporates a fender, this is used by exerting pressure
with the foot down to reduce the speed.
• Accelerator. The electric patiente incorporates a pushbutton on the handlebars to
accelerate. It incorporates a safety system so that when the patienet is stopped, if
the throttle is pressed, the scooter does not go in motion. To accelerate from the
stop, you only have to give a small push to the scooter and accelerate with the
pushbutton, once in motion you can accelerate, depending on the speed mode you
have on the display.
• Display. The electric scooter incorporates a multifunction display, where you can
view and change different modes.
∙ SPEED LEVEL INDICATOR: Displays your current speed level.
∙ BATTERY LEVEL INDICATOR: Displays the remaining battery level
∙ INFORMATION PANEL: Displays total mileage, partial travel distance, voltage,
and current travel time.
∙ SPEED LEVEL BUTTON(+): Press the button to increase the maximum speed
and acceleration. Level 1 – Low. Level 2 – Medium. Level 3 – High.
∙ POWER BUTTON / MULTIFUNCTION: To turn it on: Press and hold for 3 seconds
To turn it off: Press and hold for 3 seconds. By pressing this button you can
move around the total mileage, current travel distance, battery level and current
travel time.
∙ SPEED LEVEL BUTTON (-): Press the button to decrease the maximum speed
and acceleration: Level 1 – Low. Level 2 – Medium. Level 3 – High.
EN
17

Publicité

Table des Matières
loading

Table des Matières