Playing Back From Optional Components - Onkyo SBX-300 Manuel D'instructions

NOTE
for Caring Your iPod
 Do not touch or hit the iPod terminal pins or the connector pins 
directly. It might cause damages to the connector part.
 If the iPod does not play correctly, please update your iPod 
software to the latest version. - For details about updating your
iPod, check on the Apple web site <http://www.apple.com>.
 You may not be able to charge iPod using this unit depending 
on the type or generations of the iPod.
In such case, turn the unit ON for the proper charging of iPod.
 iPod is a trademark of Apple Inc., registered in the U.S. and other 
countries.
 iPhone is a trademark of Apple Inc. 
 iPad is a trademark of Apple Inc. 
 We are not responsible for any loss of or damage to iPod that 
might result from the use of this product.
 Sound distortion may occur when playing back audio sources with 
high recording levels. When distortion occurs, it is recommended
to turn off the equalizer of the iPod. For information on operating
the iPod, see the iPod instruction manual.
iPad, iPhone, iPod, iPod classic, iPod nano, iPod shuffl e, and iPod touch are
trademarks of Apple Inc., registered in the U.S. and other countries.
"Made for iPod", "Made for iPhone" and "Made for iPad" mean that an
electronic accessory has been designed to connect specifi cally to iPod,
iPhone, or iPad, respectively, and has been certifi ed by the developer
to meet Apple performance standards. Apple is not responsible for the
operation of this device or its compliance with safety and regulatory
standards.
Please note that the use of this accessory with iPod, iPhone or iPad may
aff ect wireless performance
10
En-

Playing Back from Optional Components

You can enjoy the sound from an optional component such as a
portable music player through the speakers of this unit. Be sure
to turn off the power of each component before making any
connections. For details, refer to the instruction manual of the
component to be connected.
1
Connect the LINE IN jack on the side of the unit to the
line output jack of an external component using an audio
connecting cable (not supplied).
2
Turn the connected component on.
3
Press button to turn on the unit.
4
Press INPUT button repeatedly to switch LINE IN mode. The
sound from the connected component is output from the
speakers of this unit.
 The source indicator turns to Green. 
To audio output
such as portable
music player.