Cleaning And Care - Magic Vision 2819 Manuel D'instruction

CLEANING AND CARE

To remove light dirt and fingerprints, use the cleaning cloth (supplied). For very dirty lenses, use water or a neutral
detergent to clean them. DO NOT use strong detergents as they may scratch the lenses.
WARNINGS
Please note that the LED reading glasses are only suitable for near vision. The glasses are not suitable for driving or
operating machinery. The LED reading glasses are not a substitute for everyday glasses. If you have any questions,
please consult an optician or ophthalmologist.
10
LED FUNCTION
These glasses are equipped with two LEDs. Through these LEDs an optimal illumination is guaranteed. The LEDs can
be switched on and off individually via the switch. The supplied USB cable can be used to charge the permanently
installed LI-ION batteries. The cable is designed in such a way that both batteries can be charged simultaneously.
Connect the USB cable to a suitable adapter and then connect one or both temples of the LED reading glasses with
the cable. The charging time is approximately four hours. The charging time depends on the charge level of the battery
and the voltage used. A charge status of the glasses is not displayed. The optimum lighting duration of the LEDs is
approx. eight hours. If you notice that the LEDs become weaker, recharge the glasses.
Off - On
11