Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INSERTING OR REPLACING THE BATTERIES
•
Remove the cover on the rear of the remate control;
•
lnsert two R03 "AAA" 1.5V batteries in the correct position (see
instructions inside the battery compartment);
•
Replace the cover .
.,/ lf the remate control unit is replaced or disposed of, the batte
ries must be removed and discarded in accordance with cur-
rent legislation as they are harmful to the environment.
USING THE REMOTE CONTROL UNIT
The first part of the controls on the remate control are the same as
those on the control panel of the appliance.
You should therefore refer to the instructions in the chapter Operating
from the control panel to turn the appliance on and select the ope
rating mode ( COOL, DRY,FAN,
HE AT ) and the fan speed.
The following section descri
bes the additional functions
corresponding to the controls
on the bottom part of the
remate control.
El
COOING MODE
H
H
-Press the
ON/OFF
button to turn the appliance on.
B� "
-Press the "
button to select COOL.
-Set the temperature using the "
-To select fan speed , press the "
until the required speed is selected (HIGH/MED/LOW).
NB: in COOLI NG mode, the appliance automatically removes
excess moisture from the atmosphere.
DRY MODE
[]
-Keep the windows and doors closed for an effective dehumidification.
-When used as dehumidifier only, keep the air exhaust hose disconnected.
-Press the "ON/OFF" button to turn the appliance on.
8� "
-Press the "
button to select DRY, the fan speed will always be at
LOW and can not be adjusted in DRY mode.
FAN MODE
�
-Press the "ON/OFF" button to turn the appliance on.
8�
H
-Press the "
button to select FAN.
-To select fan speed, press the "fan" button repeatedly until the required
speed is selected (HIGH/MED/LOW) and fan speed AUTO can not be
selected.
*·•·: f o�� • .,,
"C/"F
¡g "
button.
®
button repeatedly
H
62
��00
B\:;;/@
000
@
0
---* - -� - --
o�: ,
i.
""
�
Publicité
Table des Matières
