Package Contents - Haussmann GTU5653 Mode D'emploi

TOOLS
You will need the following tool to assemble your scarifier:
Phillips screwdriver.

PACKAGE CONTENTS

• The machine with blade cylinder and impact protector
• Upper handle bar complete with starting lever, power plug, unlocking button
and firmly mounted power cable
• Lower bar
• 2 centre bars
• Collection bag
• Cable strain relief
• 2 cable clamps
Mounting accessories:
• 2 Philips screws, 4 carriage bolts and 4 wing nuts to fasten the bar
ASSEMBLY INSTRUCTIONS
WARNING!
!
Ensure during assembly that the power cable is not squeezed and that it has
sufficient play.
Assembling the handle bar (FIG B)
1. Insert the lower bar (8) into the cylinder housing (10) and screw it on with the
two Philips screws.
2. Secure the two centre bars (15) to the lower bar (8) with the screws and wing
nuts (5a).
The two centre bars can be secured in two positions to adjust the handle bar
to your height.
3. Hang the cable strain relief (19) on the upper handle bar (4).
4. Use the screws and wing nuts (5b) to firmly secure the upper handle bar (4)
to the two centre bars (15).
5. Fasten the electric cable (16) to the bar with the two cable clamps (14a+b).
The two centre bars can be secured in two positions to adjust the handle
bar to your height.
21