Beamz DMX65W Manuel De L'utilisateur page 8

Select DMX channel with
Select step with
Note: Last step must be confirmed with
Ready? Go back to the "effects" menu with
Play your own chase:
Method 1:
Press button,
Select and confirm with
Select and confirm with
Select your chase ID with
Select
Select your desired chase speed with speed fader
Select your desired fade time between each step with fade fader
Method 2:
Press button,
Select and confirm with
Select
Select your desired light output with master fader
Select your desired chase ID with chase fader
Select your desired chase speed with speed fader
Select your desired fade time between each step with fade fader
Ready? Go back to the "effects" menu with
Delete your own chase:
Press button,
Select and confirm with
Select and confirm with
Select your chase ID with
Select
Note: This step cannot be undone!!
This controller is able to activate and deactivate a chase (ID number) at a specific time.
When using the timer function, do not switch off the controller!
Set your timer function:
Press button,
Select
Select
Select your chase ID with
Note: number 8 means manually
Select and confirm with
Enter the actual time by "TIME"
Enter start time by "POWER ON"
Enter end time by "POWER OFF"
Note: For long-term and optimal battery life, we recommend setting "POWER OFF BAT" at a minimum of 10%. Controller will
automatically switched off as soon as set percentage is reached.
Ready? Go back to the "main" menu with
button and select DMX value with the fader corresponding to the DMX channel,
button and repeat the above step up to a maximum of 15 steps.
button.
button.
button,
button,
or button and confirm with
and confirm with button,
button,
and confirm with button,
button.
button,
button,
or button and confirm with
and confirm with
and confirm with button,
and confirm with button,
or button and confirm with
button,
button.
button,
button,
button,
button,