PERFECTPRO TEAMPLAYER Mode D'emploi page 30

Pairing and playing your device via NFC
TEAMPLAYER is equipped with wireless NFC
(Near Field Communication) feature,
allowing playing NFC-enabled devices to
pair and play the music. For non-NFC devices,
please refer to the above sections for
standard Bluetooth pairing.
. Turn on your NFC feature on your device. (Important: Please
make sure the screen of your playing device is on and unlocked
to allow NFC to work.)
. Touch the NFC area of your playing device against the NFC area
marked on top panel of TEAMPLAYER. The unit will turn on
and enter automatic pairing mode. If you pair with TEAMPLAYER
for the first time, your NFC-enabled device will be asked the
permission to link with the radio. Once paired with a device,the
Bluetooth icon will remain illuminated.
3. Use the controls on your device or on your radio to play/pause
and navigate tracks.
Note:
. If you would like to link a different Bluetooth device for the first
time via NFC, disconnect the currently- linked Bluetooth device first.
. The location of the NFC detection area is not the same on all devices.
When connecting with other Bluetooth device via NFC, refer to
the User guide of your Bluetooth device for more information.
3. Some of metallic case or cover for mobile phones may reduce
the sensitivity of NFC. Make sure you remove it, before activating
the NFC.
Disconnecting your NFC-enabled device
To disconnect your device, simply touch it again on the top of the
unit. The LED light for Bluetooth icon will then start to flash indicating
your radio is discoverable again for pairing.
(Important: Please make sure the screen of your playing device is
on and unlocked to allow NFC to work.)
9