Inglesina Standup Manuel D'instructions page 14

SPARE PARTS / AFTER SALES
SERVICES
• Regularly inspect the safety devices
to ensure the product's functionality
over time. Do not use the product in
the event of any malfunction and/
or anomaly. Promptly contact your
Authorised Retailer or the Inglesina
Customer Care service.
• Do not use spare parts or accessories
not supplied and/or not approved by
Inglesina Baby.
WHAT TO DO IF YOU REQUIRE
ASSISTANCE
• If you require assistance for your
product, immediately
Inglesina Retailer that sold it to you,
with the "Serial Number" relative to
said object ready on hand (the "Serial
Number" is available from the 2010
Collection).
• It is the Retailer's duty to contact
Inglesina to assess the best suited
intervention case by case and then
provide the subsequent indications.
• The Inglesina
Service can provide any information,
following written request by filling
INSTRUCTIONS
LIST OF COMPONENTS
fig. 1
A
Main Support
B
Support feet
ASSEMBLING SEQUENCE
fig. 2
Open the main support (A)
until you hear a CLICK.
fig. 3
Fit a foot (B) at the end of the
support.
fig. 4
To complete the attachment
of the side support foot (B) on the main
14
contact the
Customer Care
out the form provided on the website:
inglesina.com - Warranty and Assistance
section.
HINTS FOR CLEANING AND
MAINTAINING THE PRODUCT
• This product requires a regular
maintenance by the user.
• Never force any mechanisms or
moving parts; in case of doubt, check
the instruction first.
• Do not store the product if it is
still wet and do not leave it in humid
environments since mildew may form.
• Store the product in a dry place.
• Protect the
atmospheric agents, water, rain or snow;
moreover, continuous and prolonged
exposure to sunlight may cause changes
in the colour of many materials.
• Clean the plastic and metal parts with
a wet cloth or with a mild detergent; do
not use solvents, ammonia or benzine.
• Carefully dry metal parts after any
contact with water in order to avoid the
formation of rust.
• Keep all moving parts cleaned and, if
necessary, lubricate the same with light
oil.
support push simultaneously both the
metal pins (C).
Repeat these operations for the other
foot as well.
CLOSING
fig. 5
Pressing the button on the
joint (D), bring the Stand-Up to closed
position.
fig. 6
Once closed the Stand-Up
remains upright on its own.
product against