Rinse Function - Kenwood kCook Multi Smart CCL45 Instructions

Hints & Tips
The temperature is fixed at 100°C and speed options cannot be selected.
The cooking times are a guide only. Always check that food is thoroughly cooked before eating.
If your food is not cooked enough, reset the time. You may need to top up with water.
Leave gaps between pieces of food and do not layer the food in the basket or tray.
Similar sized pieces of food cook more evenly.
When steaming more than 1 type of food, if something needs less time, add it later or place it in the tray
shelf.
Do not allow the unit to boil dry, top up with water as necessary.
If operating for more than 1 hour you will need to top up the water to the 1 litre mark.
Food in the steam tray base will generally cook quicker than food in the steam tray shelf.
Steaming guidelines
Note: quantities stated are based on combined capacities of steam tray base and shelf.
Food
New potatoes
Beans
Green or runner
Broccoli
Cauliflower
Carrots
Sweet potato
Chicken,
boneless breast
Fresh fish,
fillets or steak
Whole fish (e.g. trout)
Sweet steamed pudding
(homemade)
Suet pudding
(homemade)
Beef or lamb

Rinse Function

To use the rinse function:
1 Fit the tool to be cleaned.
2 Add water to the 1.0L
3 Fit the filler cap.
4 Press the button and select the RINSE programme.
5 Press the Start/Stop button.
Maximum
Quantity
1.6kg
600g
800g
1.5kg
800g
1.5kg
12
(2kg)
8
(1.4kg)
600g
1.2 litre
(14cm diameter)
pudding basin
1.2 litre
(14cm diameter)
pudding basin
mark.
Preparation
Wash and cut larger
ones into smaller pieces
Trim and thinly slice
Cut into florets
Cut into florets
Thinly slice
Cut into 3cm cubes
–
–
Clean, gut and scaled
–
–
19
Recommended
cooking time (mins)
25 – 35
15 – 25
15 – 25
15 – 25
20 – 30
20 – 30
20 – 30
20 – 25
20 – 30
1½ – 2 hrs
Top up with water after 1hr
1½ – 2 hrs
Top up with water after 1hr