Toyotomi zibro LC-150 Manuel D'utilisation page 20

Then, use the adjustment keys
adjustment key to increase the minute and the key
decrease the minute. Press extension/day/set
right minute.
The settings for program 1 for Monday are programmed and
the display shows SET for 3 seconds.
After 3 seconds choose another day or end the setting mode
by pressing timer.
Press the "timer" key
day of the week display. Timer lamp turns off.
COPYING THE SETTING FROM ONE DAY TO ANOTHER
Use the copy function if there are multiple days during one week which should have the
same setting times.
Make sure that the heater is not burning. Press the timer key
. Use the adjustment keys
displayed in the display.
Press extension/day/set
The display shows:
Use the adjustment keys
extension/day/set to select the copy function.
Use the adjustment keys
the settings should be copied. Press extension/day/set
choose the selected day.
The settings for program for Tuesday are programmed and
the display shows SET for 3 seconds.
After 3 seconds choose another day to copy or end the
setting mode by pressing timer.
OPERATING THE WEEKLY TIMER
Switch on the heater by pressing the POWER button ¹. And then press the timer-key
immediately after that. The Timer light will light up and the heater shuts off. The On / Off
indicators on the display shows whether the appliance is switched on or off.
When the appliance is switched off by the timer, the off
indicator is visible. The display shows the -actual time.
When the appliance is switched on by the timer, the on
indicator is visible. The display shows the desired (set) and
actual (room) temperature.
4
8
to set the minute. Press the
to exit the weekly timer setting mode and return to the time and a
until the day of its source is
to select.
or to choose copy. Press
or to select the day to which
to
to select the
to