Thermoplan Nespresso AGUILA400 Manuel D'utilisation page 15

CAUTION
Risk of scalding
Once cleaning is complete, re-
sidual hot water may drop from
product outlets.
Avoid direct contact with hot
water.
Protect hands from scalding.
13
1
2
1
2
Use the extraction tool to pull down the
coffee outlets.
16
Pull out the drip grates for small cups
(only in vertical position) and the drip tray
grate.
Clean all parts.
19
Remove the drip grates and wash with
a soft cloth and mild detergent under
running water.
22
Remove and clean the black plastic tray
with warm, soapy water.
Cleaning complete.
14
Remove both coffee outlets. Properly
rinse the coffee outlets with fresh potable
water.
Clean each milk outlet with a fresh, damp
single-use tissue or paper towel.
17
1
2
Reinsert the the drip grates for small cups. Daily cleaning process complete (machine
The drip grates for small cups
can only be removed when in
vertical position.
20
Remove the black plastic plug found in the
plastic tray.
23
Follow the above steps in reverse order to
assemble the drip tray.
15
Reinsert the coffee outlets.
18
3 sec
in maximum energy saving mode). If you
need to reactivate the machine, press the
Energy Saving button as described on:
page 10 .
21
Pull the metal frame towards you to
remove it.
At the end of the cleaning cycle,
make sure the refrigerator is
closed (risk of freezing).
Complete the cleaning cycle
before leaving the machine
unattended.
15
EN