Recording - Samsung 7 Serie Mode D'emploi

Anynet + Menu
The Anynet + menu changes depending on the type and status of the Anynet+ devices connected to the TV.
Anynet + Menu
View TV
Device List
(device_name) Menu
(device_name) Operation
Record: (*recorder)
(*recorder) Reserve Recording
Stop Recording: (*recorder)
Receiver
If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is
N
connected, it will be represented as (*device_name).
TV Remote Control Buttons Available in Anynet + Mode
Device Type Operating Status
After switching to the device, when
the menu of the corresponding
Anynet + Device device is displayed on the screen.
After switching to the device, while
playing a file
Device with built- After switching to the device, when
in Tuner you are watching a TV programme
Audio Device When Receiver is activated
The Anynet+ function only works when the active source on the TV remote control is set to TV.
N
The ∏ button works only while in the recordable state.
N
You cannot control Anynet+ devices using the buttons on the TV. You can control Anynet+ devices only using the TV remote
N
control.
The TV remote control may not work under certain conditions. In this case, reselect the Anynet+ device.
N
The Anynet+ functions do not operate with other manufacturers' products.
N
The π, µ operations may differ depending on the device.
N

Recording

You can make a recording of a TV programme using a Samsung recorder.
1. Press the TOOLS button. Press the ENTER E button to select Anynet+
(HDMI-CEC).
. Press the ▲ or ▼ button to select Recording: (device_name), then press the
ENTER E button. Recording begins.
When there is more than one recording device
N
When multiple recording devices are connected, the recording devices are
listed. Press the ▲ or ▼ button to select a recording device and press the
ENTER E button. Recording begins.
When the recording device is not displayed
N
Select Device List and press the red button to search devices.
3. Press the EXIT button to exit.
You can record the source streams by selecting Recording: (device_name).
N
Pressing the ∏ button will record whatever you are currently watching. If you are watching video from another device, the video
N
from the device is recorded.
Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect an
N
antenna to a recording device, refer to the recording device's users manual.
Description
Anynet+ mode changes to TV broadcast mode.
Shows the Anynet+ device list.
Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of
the DVD recorder will appear.
Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the play
menu of the DVD recorder will appear.
Starts recording immediately using the recorder. (This is only available for devices that
support the recording function.)
Enables reserving a recording for the recorder. (This is only available for devices that support
the recording reservation function.)
Stops recording.
Sound is played through the receiver.
Available Buttons
Numeric buttons
▲/▼/◄/►/ENTER E buttons
Colour buttons / EXIT button
π(Backward search) / µ(Forward search) ∫(Stop) / ∂(Play) /
∑(Pause)
P
VOL
MUTE button
English - 55
/ button
/ button
View TV
Device List
Recording
DVDR Operation
Receiver
Setup
: DVDR
: On
Move Enter Return
U E R