e-conolight ECONOLED Instructions D'installation

LED Cable Strip Dimension
30mm 30mm
15mm 15mm
12mm
5.5mm
Front view
Side view
Inline On/Off Dimmer Switch
2"
3"
Front view
Connectors
4-way Power Splitter
Power Supply (PS)
Connector
Jumper Cable
I-Connector
L-Connector
U-Connector
2-7/8"
Side view Back view
Connects four LED Cable strips to
one power supply. Requires four
PS Links.
One required for every run of cable.
Connects LED Cable to power
supply.
Connects two LED Cable strips
together with a flexible cable.
Available in 4", 6", 12" and 24"
lengths.
Connects two LED Cable strips
together in a straight line or extends
a length of LED Cable.
Connects two LED Cable strips
together at a right angle.
Connects two LED Cable strips
parallel together for twice the
brightness.
w w w . e - c o n o l i g h t . c o m | s a l e s @ e - c o n o l i g h t . c o m | 8 8 8 . 2 4 3 . 9 4 4 5
PART NUMBER LPN00459X0001A0_A, REVISED 12/28/2016
ECONOLED
®
CABLE STRIP LIGHTING
High Output Installation Instructions
LED Cable Component Layout
Power
Supply
Inline On/Off
Dimmer Switch
(optional)
AC Outlet
End Cap
T-Connector
X-Connector
End Cap
Female-to-Male Exten-
sion
Male-to-Male
Extension
LED FLEXIBLE
PS Link
4-way Connectors End Caps
Power Splitter
OR
PS Link
Connector
End Cap
U Connector
I Connector End Cap
X Connector
End Cap
Connects three LED Cable strips in
a flexible "T" shape.
Connects four LED Cable strips in a
flexible "X" shape.
Required to protect end of LED
Cable that is not connected to a
connector.
Allows for longer extension from
power supply to first run of LED
Cable. Available in 5' and 15'
lengths.
(Max 15' of extension per run.)
Allows for longer extension in
between runs of LED Cable.
Available in 5' and 15' lengths.
(Max 15' of extension per run.)
L Connector
T Connector
Jumper
Cable