Ring Automotive RAC640 Instructions D'utilisation page 4

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 6
Unscrew the valve connector and reconnect to the next tyre. If the required pressure is
the same press the M button for the compressor to automatically inflate. If the pressure
is different, re set the compressor using the + and – buttons.
The ON/OFF button can be used to override the preset pressure value if required.
Remove the valve connector from the tyre valve.
Replace the tyre valve dust cap.
Note:- The gauge on this compressor is for guidance only. Check pressure with a known
accurate gauge.
The compressor can be used without the engine running but this will drain the power
from the battery.
Inflator / Deflator operation
Remove the Velcro retaining strap and uncoil all of the power cable on the rear of the
compressor. Ensuring all the cable is unwound. Insert the 12v DC plug into the 12v
socket. (Fig 1)
Remove the inflator/deflator pipe and adapters from the compartment underneath the
compressor.
Select the suitable adapter:
Select the inflation + outlet or the deflation - inlet and push in either the B1 or B2 pipe.
Insert the connector adapter into the appropriate inlet of the inflatable
Turn the yellow power switch clockwise to the inflatable symbol for the inflator to start
(Fig 4).
Caution:
Only inflate product to the manufactures specifications.
Continuously monitor the item checking for firmness.
Caution should be taken not to over inflate.
Turn the yellow power switch back to the centre position to turn off.
Remove adaptor from the inflatable and remove adapter from the connector.
N.B. The pressure gauge does not work in conjunction with the inflator / deflator function.
Conversion Chart
psi
KPa
BAR
10
68.9
0.69
20
137.9
1.38
30
206.8
2.07
40
275.8
2.76
50
344.7
3.45
B1 - Inflator / Deflator pipe
o
B2 - Short Inflator / Deflator pipe
o
B3 - Large inflatable adaptor (can be used with either B1 or B2 & B5)
o
B4 - Small inflatable adaptor (can be used with either B1 or B2 & B5)
o
B5 - Adaptor for B3 & B4 (when connecting to B2)
o
psi
KPa
BAR
70
482.6
4.83
80
551.6
5.52
90
620.5
6.21
100
689.5
6.90
125
861.9
8.62
Autogoods "130"

Publicité

Table des Matières
loading

Table des Matières