Charging Instructions - Rehan Electronics Looky+ Manuel D'utilisation

9 Charging instructions

Plug the adaptor into the wall socket and connect the plug into the power jack (1)
of the Looky+. You will hear two brief beeps and the LED light (2) will be switched
on during charging.
Charging time: ± 5 hours (depending on the battery capacity)
Time of use: ± 2 hours (depending on the battery capacity)
LED burning constantly the batteries are being charged
LED blinking
LED blinking + audible
dual signal
Note: the charging process will be interrupted when the Looky+ is
switched on!
the batteries are fully charged
the Looky+ contains broken or non-
rechargeable batteries
1
2