Marechal Electric DS1 Mode D'emploi page 16

►WARNINGS (1/2)
• MARECHAL ELECTRIC SAS declines any responsibility in the
event of non-observance of applicable standards and
instructions contained in this document.
• These devices must be installed and maintained by a
qualified electrician.
• MARECHAL® devices must be used with MARECHAL®
complementary devices only. Any repair or service must be
performed with genuine MARECHAL® parts only.
• Only devices with similar casing material should be mated
with each other: poly with poly and metal with metal. Metal-
cased devices may use rear accessories (handle, box, adaptor)
of insulating material.
• For optimum operation, ensure that the flexible cable does
not hinder the return of the device to its rest position.
• Apply the recommended tightening torques. Do not
overtighten the self-tapping screws.
• Poly box closing screws must be tightened at a torque of 1.2
Nm.
,
IS 06-1 [DS1/DS3/DS6/DS9] Rev A.0 - 2022-02 16/85