Picture Zoom; Reset; Store; Sound Menu - Salora LCD4231FH Mode D'emploi

All manuals and user guides at all-guides.com

Picture Zoom

Select Picture Zoom by pressing " " or "
" button.
Use " " or " " buttons, to change picture zoom
to Auto , 16:9 , 4:3 , Panoramic , 14:9 , Cinema ,
Subtitle or Zoom .

Reset

Press " " or " " button to select Reset . Press
" " or " " or OK button to reset the picture
modes to factory default settings.

Store

Press " " or " " button to select Store. Press "
" or OK button to store the settings. " Stored... "
will be displayed on the screen.

Sound Menu

Volume

Press " " or " " button to select Volume .
Press " " or " " button to change the level of
the Volume.

Equalizer

Press " " or " " button to select Equalizer .
Press " " button to view equalizer menu.
03_[GB]_SSM_MB35_42883W_1800UK_ANALOG_BRONZE2_10064563_50152044.indd 91 03_[GB]_SSM_MB35_42883W_1800UK_ANALOG_BRONZE2_10064563_50152044.indd 91
Press " " or " " button to change the preset.
In equalizer menu, the preset can be changed
to Music , Movie , Speech , Flat , Classic and
User .
Select the desired frequency by pressing "
" or " " button and increase or decrease the
frequency gain by pressing " " or " " button.
Press the " M " button to return to the previous
menu.
Note : Equalizer menu settings can be changed only
when the Equalizer Mode is in User .

Balance

This setting is used for emphasizing left or right
speaker balance.
Press " " or " " button to select Balance.
Press " " or " " button to change the level of
the balance. Balance level can be adjusted
between -32 and + 32.

Headphone

Press " " or " " button to select Headphone .
Press " " button to view the headphone
menu.
Headphone sub-menu options are described
below:
Volume
Press " " or " " button to select Volume . Press
" " button to increase headphone volume
level. Press " " button to decrease headphone
volume level. Headphone volume level can be
adjusted between 0 and 63 .

Headphone Sound (optional)

Press " " or " " button to select Headphone
Sound . Using " " or " " button, you can select
Main, PIP/PAP, Active or Inactive.
Main : Main window sound.
PIP/PAP : PIP/PAP window sound.
Active : Sound of the current selection.
Inactive : Sound of the currently inactive
window.

Sound Mode (optional)

Press " " or " " button to select Sound Mode .
Using " " or " " button, you can select Mono,
Stereo, Dual I or Dual II mode, only if the
selected channel supports that mode.
English - 91 -
29.07.2009 13:04:41 29.07.2009 13:04:41