Connecting To A Dvd Player - Salora LCD4231FH Mode D'emploi

All manuals and user guides at all-guides.com

Connecting to a DVD Player

If you want to connect a DVD player to your LCD TV, you can use connectors of the TV set. DVD
players may have different connectors. Please refer to your DVD player's instruction book for
additional information. Power off both the TV and the device before making any connections.
Note: Cables shown in the illustration are not supplied.
• If your DVD player has an HDMI socket, you can connect via HDMI. When you connect to DVD
player as illustrated below, switch to HDMI source. See, "Input Selection" section.
• Most DVD players are connected through COMPONENT SOCKETS. Use a component video
cable to connect video input. For enabling audio, use a component audio cable as illustrated
below. When the connection is made, switch to YPbPr source. See, "Input selection" section.
• You may also connect through the SCART 1 or SCART 2. Use a SCART cable as shown
below.
Note : These three methods of connection perform the same function but in different levels of quality. It is not
necessary to connect by all three methods.
03_[GB]_SSM_MB35_42883W_1800UK_ANALOG_BRONZE2_10064563_50152044.indd 84 03_[GB]_SSM_MB35_42883W_1800UK_ANALOG_BRONZE2_10064563_50152044.indd 84
REAR VIEW
English - 84 -
29.07.2009 13:04:38 29.07.2009 13:04:38