Technical Characteristics - essentiel b SP40 Notice D'utilisation

Technical characteristics

• Voltage: 5 V 2 A
• Strip of 140 LEDs
• 3 light modes (cool, warm, white)
• 11 brightness levels
• USB-A wired connection
• Coloured backgrounds held in place by fasteners
• Top opening for high-angle shots
• Dimensions (L x W x H): 40 x 40 x 42.5 cm
• Material: Polypropylene
installation
1. Unfold the photo studio.
2. Attach parts 1, 2 and 3 using the wall mounting accessories.
3
2
1
2
1
NOTE: Note the difference between the inner and outer wall mountings.
3. Fully unwind the power cable with the controller.
4. Insert the micro-USB plug of the receiver into the micro-USB port of the LED strip.
5. Insert the USB-A plug of the receiver into the USB-A port of your computer, a battery charger or an
adapter (not included).
A
3
inside
2
1
C B
1
2
3
2
1
outside
3
A
3
V.1.0
installation
5